特点

• 斑点调整：最小化由于光线条件造成的不平衡画面密度
• 近红外灵敏度:采用索尼Exview HAD CCD II 科技,使相机在近红外波段可以拍摄清晰画面
• 缺陷矫正：自动将摄像机内部的缺陷像素最小化
• 温度读取：排除单独成像器件的需求和简化系统构成
• 存储频道：除了工厂默认设置，有高达16套摄像机参数可以储存
• Bulk Trigger 模式：用一个硬件触发或者软件触发,可使用摄像机连续捕捉多达16个画面

• 顺序触发模式;在摄像机捕捉单个画面同时,运用记忆频道里的连续设置

• 
  

  Camera

  Image Sensor	1/1-type progressive scan IT CCD
  Image Sensor (Number of Effective Pixels, H x V)	2,758 x 2,208
  Cell Size (H x V)	4.54 μm x 4.54 μm
  Output Pixels (H x V)	2,752 x 2,200
  Output Pixels (H x V, Full Resolution)	2,758 x 2,200
  Frame Rate	27 fps (4ch) 13 fps (2ch) 9 fps (1ch)
  Minimum Illumination (50%)	1.0 lx (Iris: F1.4, Gain: +18 dB, Shutter: 1/27 s)
  Sensitivity	F8 (400 lx, Gain: 0 dB)
  S/N Ratio	More than 50 dB
  Gain	Auto, Manual : 0 dB to +18 dB
  Shutter Speed	Auto, Manual : 2 s to 1/100,000 s

  Camera Features

  Readout Modes	Normal, Binning (2 x 1, 1 x 2, 2 x 2), Partial scan
  Readout Features	Binarization, Gamma (variable), Built-in test pattern, LUT, 3 x 3 filter
  Synchronization	Hardware trigger, Software trigger
  Trigger Modes	Edge detection, Pulse width detection, Bulk trigger, Sequential trigger
  Memory Channel (Usersets)	16 channels
  User Memory	32 kbytes + 64 bytes x 16ch
  Other Features	Shading correction, Defect correction, Temperature readout

  Interface

  Video Data Output	8, 10, 12-bit, digital
  Digital Interface	LVDS
  Camera Specification	CameraLink® Version1.2
  Output Data Clock	4ch : --- (1 tap), 84 MHz (2 tap) 2ch : 84 MHz (1 tap), 42 MHz (2 tap) 1ch : 27 MHz (1 tap), 27 MHz (2 tap)
  Digital Input/Output	IN (x2), OUT (x2), IN/OUT (x2)

  General

  Lens Mount	C mount
  Power Requirements	DC +12 V (+10.5 V to +15.0 V)
  Power Consumption	6.0 W (typical)
  Operating Temperature	-10°C to +45°C 14°F to + 113°F
  Performance Guarantee Temperature	0°C to 40°C 32°F to + 104°F
  Storage Temperature	-30°C to +60°C -22°F to +140°F
  Operating Humidity	20% to 80% (no condensation)
  Storage Humidity	20% to 95% (no condensation)
  Vibration Resistance	10 G (20 Hz to 200 Hz)
  Shock Resistance	70 G
  Dimensions (W X H X D)*	50 x 50 x 57.5 mm (excluding protrusions) 2 x 2 x 2 3/8 inches (excluding protrusions)
  Mass	200 g 7.1 oz
  Regulations	UL60950-1, FCC Class A, CSA C22.2-No.1, IC Class A Digital Device, CE : EN61326 (Class A), AS EMC: EN61326, VCCI Class A, KCC
  Supplied Accessories	Lens mount cap (1) Operating instructions (1)
  *	The values for dimensions are approximate.